Effective solutions to fix “boot device not found hp”

This is one of the common error messages that users come across on their HP laptops, desktops, and computers. You might have visited this page, only if you are also getting the same error message. Fortunately, you have landed at the right place because here we will discuss some possible solutions for the hp laptop 3f0 error fix. Before, let us know what might have caused this error to occur.

boot device not found hp

Reasons why hp boot device not found?

When you see that the boot device is not found or could not be detected, then it means that the operating system of your device is not able to find the bootable hard disk or the boot sector. Following are the reasons why this must be happening with your device:

  • The hard drive is available for the booting purpose in the non-bootable disk.
  • The hard drive is either corrupted or dead.
  • MBR or the boot sector of your HP device might have been damaged.
  • Your device might have undergone a virus attack.

Fix boot device not found from HP boot menu

Solution 1- Change boot order

Once you know the reason behind this problem, you can try to change the boot order. For this, first of all, you need to ensure that you are booting on the right hard device. In case you choose the non-bootable device by mistake, then it will never be able to boot. Also, you will come across the following error message:

“boot device not found please install an operating system on your hard disk”.

Hence, you need to change the boot order in the BIOS. After this, you have to boot the laptop from a bootable device. If this doesn’t work, try contacting HP Customer Service or perform the next method.

Solution 2- Perform a hard reset

In case, you see that no boot device is detected, then you may need to perform a hard reset on it. However, it may erase all the information present on it but it will definitely restore functionality. The hard reset clears out and re-establish the software connection. Follow the steps given below to perform a hard reset:

  1. First, you need to turn off the computer.
  2. Remove the docking station from the computer, if there is any.
  3. In case there is an external device connected to it, then you should disconnect it.
  4. Also, unplug the AC adapter and remove the battery.
  5. Now, press and hold the power button. Do it for up to 15 seconds.
  6. Now, insert the battery and plug the adapter back in it.
  7. Next, turn the computer on and select the ‘Start’ option.
  8. Hit the ‘Enter’ key and wait for a few moments.

HP laptop 3f0 error fix

You can try restoring BIOS default settings if none of the above solutions worked. To do so:

  1. Turn off your HP device and wait for 5 seconds.
  2. Now, restart the computer and continuously press F10 keys.
  3. This will open the BIOS setup menu.
  4. Here, you need to press F9 keys for selecting the default settings.
  5. Again press the F10 key and exit the window.
  6. Select ‘Yes’ when prompted and follow some more prompts.
  7. Finally, restart your computer to check if the problem has eradicated or not.

If it has not, then try contacting the support team at HP Chat Support.

Frequently Asked Questions

  1. What does error code 3f0 mean?

This is one of the common error screens that appear on HP devices. Error code 3f0 means that your computer is unable to find the boot device. Whenever you come across this error, then you have to make sure that the hard drive is the primary boot device in BIOS and nothing else. Also, ensure that all the cables connected to the motherboard are intact.

  1. How do I fix my HP hard drive error?

If you have tried everything and nothing has worked, then the ultimate thing you can do is perform a hard reset on it. Hard resetting clears all the information present on your device and restores all the default settings.

  1. How can I get my HP laptop to boot up?

Turn on your computer and while you do so, you need to keep pressing the F10 key repeatedly. This will open the BIOS from where you can go to the boot menu. Here, you need to change the boot order and follow some easy prompts.

  1. How do I fix my HP 3f0 error?

To fix the HP 3f0 error, you can try changing the boot order. Other than this, you can hard reset your device or restore the default settings of BIOS. You may also visit www.hp.com/go/techcenter/startup for fixing diagnostic errors while starting up your device.

Add a Comment

Your email address will not be published. Required fields are marked *